| Label Type |
Select the type of label that your printer is using:
- Continuous: Prints labels based on configured label length
- Gap/Notch: Prints labels based on detecting gaps/notches between labels
- Mark: Prints labels based on black mark at the back of the label which printers recognize as end point and start point of labels
|
| Label Removal Method |
Determines how the label is removed while printing is occurring. Methods include:
- Tear Off: Printer prints as fast as it is set to with no pause
- Peel Off: label backing is peeled off by the printer hardware
- Rewind: Printer hardware component peels the back off of the label. A mechanical arm rolls up peeled backing.
- Applicator: For printers equipped with an applicator board to synchronize printing with control device signaling
- Cutter: Mechanical cutter is triggered to cut from the rest. The printer waits until the cut is completed before printing the next label.
- Delayed Cut: Printer only cuts when it receives a command from the printing software.
- RFID: Printer detects the RFID element of the label and prints accordingly
- Linerless Peel: Printer waits until the previous label is torn off before printing the next label.
- Linerless Rewind: Linerless paper is wound onto the option rewind bar.
- Kiosk: Printer follows behavior determined by kiosk use.
- Linerless Tear: Prints linerless labels for the user to tear off. Printer does not wait between labels if more than one is printed.
- Stream: Prints second label before first label's printing is completed but does not complete second label's print until the next Start Print signal is received.
|
| Distance between label gap and mark |
Set the distance between the label gap and black mark. |
| Label Position (left edge) |
Set the position of the left starting edge of the label. |
| Length of Printer Label |
Set the length of the printer label. |
| Width of Printer Label |
Set the width of the printer label. |
